Rapido Proto Paint 330032 - Airbrush Ready Acrylic - TH&B Cream (1oz) Bottle

Airbrush Ready Acrylic - TH&B Cream (1oz) Bottle (Water-wash up, non-toxic, contains glyco ethers) Rapido paint is color-matched to real paint chips for the most accurate shades possible. All railroad paints dry to a decal-ready gloss finish and weathering shades dry to a flat finish. RECOMMENDED PRACTICES: - Clean all surfaces with soap and water let air dry. - Prime all surfaces with primer #330003 (Note: For best results, the primer works best if you add a few drops of the base color you will be using on you model). - Airbrush should be used with a #2 needle and tip to avoid spitting and clogging. - Air Pressure should be between 20-25 PSI. If using lower air pressure, reducer #330004 should be used. - Paint will set up in 1 hr. But it is recommended to wait 24hrs. before masking and applying a second color. - Avoid applying heavy coats. It is better to apply several light coats to avoid runs in the paint. - Paint will dry to a glossy, decal-ready surface. - After decals have been applied seal them with flat finish #330005. - Clean up your airbrush with soap and hot water.