ESU 59629 - HO & O Gauge LokPilot 5 DCC Decoder - 21MTC NEM660

HO & O Gauge LokPilot 5 DCC Decoder - 21MTC NEM660 Features: We know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5 DCC Decoder at least 10 amplified function outputs with 250mA output current each. In the executions with PluX22 or 21MTC interface there are 4 outputs to control servos or Logic level outputs added. All-important lighting functions are available. The brightness of each output can be set separately. The decoder masters automatic pushing and pulling when uncoupling for ROCO, Krois and Telex couplings. Motor control: The engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors. Operation - The typical hum is a thing of the past. The load control now has up to10 CVs which can be adjusted for difficult cases. The unique Autotune function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors. Operational safety: On request, a Power Pack can be fitted to the LokPilot 5 DCC to bridge dirty rail sections. Protection: Of course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.